Fujitsu MHT2020AT Product Manual page 168

Interface
Table 5.18 DEVICE CONFIGURATION IDENTIFY data structure
Word Value
0 X'0001'
1 X'0007'
2 X'003F'
3-6 -
7 X'00CF'
(X'01CF') *
8-254 X'0000'
255 X'xxA5'
*: When "48 bit LBA" of the option (customize) is supported, same number of
LBA as WORD60-61 is displayed.
5-94
Data structure revision
Multiword DMA modes supported
Reflected in IDENTIFY information "WORD63".
Bit 15-3: Reserved
Bit 2: 1 = Multiword DMA mode 2 and below are supported
Bit 1: 1 = Multiword DMA mode 1 and below are supported
Bit 0: 1 = Multiword DMA mode 0 is supported
Ultra DMA modes supported
Reflected in IDENTIFY information "WORD88".
Bit 15-6: Reserved
Bit 5: 1 = Ultra DMA mode 5 and below are supported
Bit 4: 1 = Ultra DMA mode 4 and below are supported
Bit 3: 1 = Ultra DMA mode 3 and below are supported
Bit 2: 1 = Ultra DMA mode 2 and below are supported
Bit 1: 1 = Ultra DMA mode 1 and below are supported
Bit 0: 1 = Ultra DMA mode 0 is supported
Maximum LBA address Reflected in IDENTIFY information
"WORD60-61". (WORD100-103) *
Command set/feature set supported
Reflected in IDENTIFY information "WORD82-87".
Bit 15-9: Reserved
Bit 8: 1 = 48-bit Addressing feature set supported
Bit 7: 1 = Host Protected Area feature set supported
Bit 6: 1 = Automatic acoustic management supported
Bit 5: 1 = READ/WRITE DMA QUEUED commands supported
Bit 4: 1 = Power-up in Standby feature set supported
Bit 3: 1 = Security feature set supported
Bit 2: 1 = SMART error log supported
Bit 1: 1 = SMART self-test supported
Bit 0: 1 = SMART feature set supported
Reserved
Integrity word. Bits 15:8 contains the data structure checksum that is
the two's complement of the sum of all byte in words 0 through 254
and the byte consisting of bits 7:0 of word 255.
Content
C141-E192-01EN