Device Configuration; Figure 2.1 Disk Drive Outerview (The Mhj Series And Mhk Series) - Fujitsu MHJ2181AT Product Manual

Device Configuration

2.1 Device Configuration
Figure 2.1 shows the disk drive. The disk drive consists of a disk enclosure (DE),
read/write preamplifier, and controller PCA. The disk enclosure contains the disk
media, heads, spindle motors, actuators, and a circulating air filter.
MHJ21xxAT

Figure 2.1 Disk drive outerview (the MHJ Series and MHK Series)

(1) Disk
The outer diameter of the disk is 65 mm. The inner diameter is 20 mm. The
number of disks used varies with the model, as described below. The disks are
rated at over 50,000 start/stop operations.
MHJ2181AT: 3 disks
MHK2120AT: 2 disks
(2) Head
The heads are of the contact start/stop (CSS) type. The head touches the disk
surface while the disk is not rotating and automatically lifts when the disk starts.
Figure 2.2 illustrates the configuration of the disks and heads of each model. In
the disk surface, servo information necessary for controlling positioning and
read/write and user data are written. Numerals 0 to 5 indicate read/write heads.
2-2
MHK2xxxAT
MHK2090AT: 2 disks MHK2060AT: 1 disk
C141-E088-03EN