Konica Minolta bizhub C650 User Manual page 109

Printing a user box document
Parameter
Tri-fold (Fold/Bind):
Z-Fold
(Fold/Bind: When FS-608 is
installed)
(Fold: When FS-517/FS-518 is
installed)
!
Detail
The feeding method when a finisher is installed can be changed from Administrator mode. For details
on the Finishing settings, refer to the User's Guide [Copy Operations].
When a Fold/Bind setting is selected, "Sort" is automatically selected, and the "Group", Offset, Staple
and Punch settings are canceled.
In order to carry out the Z-fold finishing process, the Z-folding unit must be installed on the optional
finisher FS-608/FS-517/FS-518.
The printouts are Z-folded only when the loaded size of the saved document supports Z-Fold (8-1/2 ×
14 w, 11 × 17 w, A3 w, B4 w or 8K w).
Reminder
In order to select a Fold/Bind setting, all of the following conditions must be met.
The paper width must be between 7-3/16 and 12-1/4 inches on the North American (inch) model
(between 182 and 314 mm on the European (metric) model).
The paper length must be between 10-1/8 and 18 inches on the North American (inch) model (between
257 and 458 mm on the European (metric) model).
In order to use a Fold/Bind setting, optional finisher FS-608 must be installed.
1
In the Print screen, touch [Finishing].
C650
Description
Select this setting to fold copies in three before feeding them out.
Select this setting to fold copies in half along the center, and additionally mountain-
fold one of the halves before feeding them out.
4
4-8