Hdd Lock Password - Konica Minolta bizhub C650 User Manual

Specifying Utility mode parameters
– To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the
Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
All data on the hard disk is overwritten.
Reminder
While the data is being overwritten, do not use the main power switch to turn the machine off and on.
When the machine is turned off, then on again with the main power switch, wait at least 10 seconds to
turn on the machine after turning it off; otherwise, the machine may not function correctly.

HDD Lock Password

The password for locking the hard disk can be specified.
The hard disk locking password is extremely important in order to protect the data on the hard disk. Keep
the password in a safe place so that it will not be lost.
Reminder
Be sure to keep the password in a safe place so that it will not be lost. If the password is lost, significant
restoration operations will be required for recovery.
1
Touch [Security Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 7-4.
2
Touch [6 HDD Setting] in the Security Setting screen.
3
Touch [4 HDD Lock Password] in the HDD Setting screen.
The HDD Lock Password screen appears. From this screen, the password can be changed or the hard
disk locking password can be canceled.
C650
7
7-34