Starting Debugging; Verification Items When Starting Debugging - Fujitsu SOFTUNE F2 MC-16 User Manual

2.6.1

Starting debugging

This section describes the method of starting debugging by with the use the MB2100-01
emulator debugger.
■ Starting Debugging
When starting debugging, select the [Debug] - [Start debug] menu. When debugging is started by a new
project, the setup wizard for performing initial setting is activated. For details, refer to "4.7.2.5 Setup
Wizard" in "SOFTUNE Workbench Operation Manual".

■ Verification Items When Starting Debugging

When starting debugging, perform checking for initial settings. When an item of initial setting is not correct,
debugging cannot be started.
- Operating environments of the target
Verify whether the operating environment of the target has a problem.
For details, refer to "2.6.1.1 Operating Environments of the Target".
- Security
Verify whether the security function has been enabled.
For details, refer to "2.6.1.2 Security".
CHAPTER 2 DEPENDENCE FUNCTIONS
273