Displaying Trace Data Storage Status - Fujitsu SOFTUNE F2 MC-16 User Manual

CHAPTER 2 DEPENDENCE FUNCTIONS
2.3.6.4

Displaying Trace Data Storage Status

It is possible to displays how much trace data is stored in the trace buffer. This status
data can be read by specifying /STATUS to the SHOW TRACE command.
■ Displaying Trace Data Storage Status
It is possible to displays how much trace data is stored in the trace buffer. This status data can be read by
specifying /STATUS to the SHOW TRACE.
[Example]
>SHOW TRACE/STATUS
en/dis
buffer full = nobreak
sampling
code
verbose
frame no.
>
176
= enable ;
;
= end ;
= enable ;
= disable ;
= -00120 to 00000 ;
Trace function enabled
Buffer full break function disabled
Trace sampling terminates
Code execution enabled
Verbose trace disabled
Frame -120 to 0 store data