Performance-Buffer-Full Break - Fujitsu SOFTUNE F2 MC-16 User Manual

2.5.4.6

Performance-Buffer-Full Break

It is a function to abort the program execution when the buffer for the performance
measurement data storage becomes full.
■ Performance-Buffer-Full Break
It is a function to abort the program execution when the buffer for the performance measurement data storage
becomes full.
When a break occurs due to a performance-buffer-full break, the following message is displayed on the
Status Bar.
Break at Address by performance buffer full
■ Setting Method
The performance-buffer-full break is controlled by the following method.
• Command
- SET PERFORMANCE/BREAK
Refer to "4.8 SET PERFORMANCE (type 2)" in "SOFTUNE Workbench Command Reference
Manual".
• Dialog
- Performance set dialog
Refer to "4.4.13 Performance" in "SOFTUNE Workbench Operation Manual".
CHAPTER 2 DEPENDENCE FUNCTIONS
249