Demo Mode - Alpine PXE-H660 Owner's Manual

Audio processor
Table of Contents

Advertisement

DEmO mODE

Demo Mode Overview
• Demo mode will allow the user to audition MultEQ ON and OFF with the press of a
single button on the remote control.
Demo Mode
• Press the MODE button once on the PXE-H660 to reach the Demo mode screen on the
LCD. Press the "ENTER" button once to enter the Demo mode. At this time, "DEMO
MODE ON" appears in the display. Press the Fader "REAR" button to turn OFF MultEQ/
AntEQ™ , while pressing the Fader "FRONT" button turns MultEQ/AntEQ ON.
• While in the Demo mode, all remote controller buttons are locked out except: Volume
UP, Volume DOWN, HU and AUX source switch buttons, and MUTE (if AUX PRIMA-
RY SOURCE switch is ON then HU source switch button is also locked out).
• Press the "ENTER" button again to turn off the Demo mode and resume normal opera-
tion. At this time, "DEMO MODE OFF" appears in the display.
22

Advertisement

Table of Contents
loading

Table of Contents