Alpine PXE-H660 Owner's Manual page 18

SETUP PROCEDURE
13. "ERROR! CABIN NOISE-NO MIC" - Speaker detection Error
If the PXE-H660 displays this error display on the LCD and the MultEQ LED will
blink quickly. Troubleshoot the system by making sure that nothing has become dis-
connected or turned off and the MIC is plugged in. Also make sure the vehicle is in a
noise free environment. Excessive background noise can cause issues with the process.
Press the "C" button on the remote once the issue has been corrected. The MultEQ
LED blinks slowly again. Repeat Step 12 above.
14. "PUT MIC POS2 PRESS C"
Reposition the microphone to the secondary position in the vehicle. When ready, exit
the vehicle. Press "C" on the remote control to continue. The MultEQ LED will be
illuminated steady green while measuring position 2. When the MultEQ LED starts
to blink slowly again, Position 2 measurement is complete; continue to the MultEQ™
next step.
18