Changing The Frequency Step Setting (Tuner Frq Step); Switching The Video Signal Type (Tv Format); Removing The Limitation On Hdmi Video Output (Monitor Check) - Yamaha RX-A1010 Owner's Manual

5
Press ENTER to confirm the setting.
Once the remote control ID is registered successfully, "OK" appears in the display window.
If "ERROR" appears, registration failed. Repeat from step 3.
6
To exit from the setup menu, press SETUP.
• The registered remote control codes (p.123) are not cleared even if you change the remote control ID.

Changing the frequency step setting (TUNER FRQ STEP)

(Asia and General models only)
TUNER FRQ STEP
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
FM50/AM9
2 3 4
IN OUT 1 OUT 2
SLEEP
HD 3
Change the frequency step setting of this unit depending on your listening environment.
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps and
FM100/AM10
AM by 10-kHz steps.
FM50/AM9 Select this when you want to adjust the FM frequency by 50-kHz steps and
(default) AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

TV FORMAT
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
PAL
2 3 4
IN OUT 1 OUT 2
SLEEP
HD 3
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
Canada, Korea and General models: NTSC
Other models: PAL
Removing the limitation on HDMI video output
(MONITOR CHECK)
SP IMP. - MONITOR CHECK
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 YES
IN OUT 1 OUT 2
ENHANCER SLEEP
3
HD
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in "Resolution" (p.109) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
Settings
Enables the monitor check function. (Outputs video signals with a
YES (default)
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
"MONITOR CHECK" is set to "SKIP", reset the setting to "YES".
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
121
En