Hdmi - Yamaha RX-A1010 Owner's Manual

HDMI

Configures the settings related to HDMI.
■
HDMI Control
Enables/disables HDMI Control (p.144).
Settings
Off (default) Disables HDMI Control.
Enables HDMI Control.
On Configure the settings in "TV Audio Input", "ARC" and
"Standby Sync".
• To use HDMI control, you need to perform the HDMI Control link setup (p.144) after connecting HDMI
Control-compatible devices.
❑ TV Audio Input
Selects an audio input jack of this unit to be used for TV audio input when "HDMI
Control" is set to "On". The input source of this unit automatically switches to TV audio
(input jack selected in here) when the TV input is switched to its built-in tuner.
Settings
AUDIO1~4
Default
AUDIO1
• When using ARC to input TV audio to this unit, you cannot use the input jacks selected in here for
connecting an external device because the input will be used for TV audio input.
❑ ARC
Enables/disables ARC (p.29) when "HDMI Control" is set to "On".
Settings
Off Disables ARC.
On (default) Enables ARC.
• You do not need to change this setting normally. In case noises are produced from the speakers connected
to this unit because TV audio signals input to this unit via ARC are not supported by this unit, set "ARC" to
"Off" and use the TV speaker.
❑ Standby Sync
Select whether to set this unit to standby in conjunction with TV power-off when "HDMI
Control" is set to "On".
Settings
Does not set this unit to standby mode in conjunction with TV
Off
power-off.
Sets this unit to standby mode in conjunction with TV power-
On
off.
Sets this unit to standby mode in conjunction with TV power-off
Auto (default)
only when this unit is receiving TV audio or HDMI signals.
111
En