Video - Yamaha RX-A1010 Owner's Manual

■
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with
volume adjustments.
Settings
Off Does not adjust the effect level automatically.
Adjusts the effect level automatically. Also, the effect level is corrected
On (default)
according to the measurement results of "Auto Setup" (p.45).

Video

Configures the video output settings.
■
Analog to Analog Conversion
Enables/disables the video conversion (p.143) between the analog video jacks
(COMPONENT VIDEO, S VIDEO and VIDEO).
Settings
Off Disables the video conversion between the analog video jacks.
Enables the video conversion between the analog video jacks.
On (default)
Converted video signals are output from the MONITOR OUT jacks only.
• This function works only when "Monitor Out Assign" (p.114) is set to "Main".
• This unit does not convert 480-line and 576-line video signals interchangeably.
• 480p/576p-, 1080i- and 720p-resolution video signals cannot be output from the S VIDEO and VIDEO
jacks (p.143).
■
Processing
Enables/disables the video signal processing (resolution, aspect ratio and video
adjustments).
Settings
Off (default) Disables the video signal processing.
Enables the video signal processing.
On
Configure the settings in "Resolution", "Aspect" and "Adjustment".
❑ Resolution
Selects a resolution to output HDMI video signals when "Processing" is set to "On".
Settings
Through Does not convert the resolution.
Selects a resolution automatically in accordance with TV
Auto (default)
resolution.
480p/576p, 720p, 1080i, Output video signals with a selected resolution.
1080p (Only the resolutions supported by your TV are selectable.)
• If you need to select a resolution that is not supported by your TV, set "MONITOR CHECK" (p.121) in the
"ADVANCED SETUP" menu to "SKIP" and try again. (Note that output videos may not be displayed on your
TV normally.)
❑ Aspect
Selects an aspect ratio to output HDMI video signals when "Processing" is set to "On".
Settings
Through (default) Does not convert the aspect ratio.
Outputs 4:3 video signals to a 16:9 TV with black bands on either
16:9 Normal
side of the screen.
Adjusts 4:3 video signals to fit a 16:9 TV. (The edges of video
Smart Zoom
images may be distorted.)
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i or 1080p
signals.
109
En