Using The Simplified Remote Control - Yamaha RX-A1010 Owner's Manual

Using the simplified remote control

1
2
NET
USB
SCENE
3
1 2 3 4
4
INPUT
VOLUME
ON SCREEN OPTION
5
ENTER
6
MUTE
RETURN DISPLAY
7
PRESET
8
Remove the insulation
sheet before using the
remote control.
1
Remote control signal transmitter
Transmits infrared signals.
2
NET/USB
Press repeatedly to select a desired network source or
9
"USB".
3
SCENE
Selects the assigned input source, sound program, HDMI
output and various settings at once. Additionally, you can
turn on this unit when it is in standby mode (p.53).
4
INPUT
Selects an input source.
5
ON SCREEN
0
Displays the on-screen menu on the TV.
6
Menu operation keys
A
Cursor keys Select a menu or a parameter.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
B
C
7
External device operation keys
Operate playback of the iPod, USB storage device or
network sources.
8
PRESET
Selects a preset FM/AM radio station (p.61).
Selects a USB/network content from shortcuts (p.86).
9
(Power)
Turns on/off (standby) this unit.
0
OPTION
Displays the option menu (p.90).
A
VOLUME
Adjusts the volume.
B
MUTE
Mutes the audio output.
C
DISPLAY
Displays the status information on the TV (p.89).
Switching the zones to operate with the simplified
remote control
• Main zone: Hold down the cursor key ( ) and
SCENE1 together for 3 seconds.
• Zone2: Hold down the cursor key ( ) and SCENE2
together for 3 seconds.
• Zone3: Hold down the cursor key ( ) and SCENE3
together for 3 seconds.
Selecting the remote control ID
• ID1: Hold down the cursor key ( ) and SCENE1
together for 3 seconds.
• ID2: Hold down the cursor key ( ) and SCENE2
together for 3 seconds.
Replacing the battery
Replace with a new battery (CR2025) when the
operation range of the simplified remote control
decreases.
Use a straight Replace with a
pin to remove new battery.
the cover.
Close the
cover.
131
En