Connecting To The Network - Yamaha RX-A1010 Owner's Manual

1 2 3 4 5
Network connections
5

Connecting to the network

Connect this unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on PCs and DLNA servers such as
Network Attached Storage (NAS) on this unit.
Internet
WAN
LAN
Modem
Router
Network cable
DOCK NETWORK
AV 1 AV 2 AV 3 AV 4
AV OUT
(1 BD/DVD)
PHONO
GND
L
R
1 COAXIAL 2 COAXIAL 3 OPTICAL 4 OPTICAL
ANTENNA
(4 RADIO)
AM FM
75Ω
• When using a router that supports the DHCP function, the network parameters (IP address, etc.) will be
automatically assigned to this unit without configuring the network settings of this unit. If your router does
not support the DHCP function or you want to configure the network parameters manually, configure the
network settings (p.112).
• You can check whether the network parameters (IP address, etc.) are properly assigned to this unit in
"Network" (p.119) in the "Information".
6 7 8 9
Network Attached Storage
(NAS)
PC
HDMI OUT
1 2 AV 1 AV
ARC (1 BD/DVD)
COMPONENT VI
MONITOR OUT/
Y P B P R Y
ZONE OUT
AV 1
A
AV 2
B
AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4 MULTI CH INP
(2 TV) (3 CD)
FRONT SURROUND SUR.
5 OPTICAL 6 COAXIAL
SURROUND SU
R L R
This unit (rear)
• Some security software installed on your PC or the firewall settings of your network devices (such as a
router) may block the access of this unit to the network devices or the Internet. In such cases, configure the
security software or firewall settings appropriately.
• You can connect this unit to up to 16 music servers (PC, etc.), and each server must be connected to the
same subnet as this unit.
• To use the service via the Internet, broadband connection is strongly recommended.
40
En