Input/Output Assign - Onkyo DTR-40.2 Instruction Manual

Explanatory Notes
Main Menu
■
Subwoofer
Yes:
Select if a subwoofer is connected.
No:
Select if no subwoofer is connected.
Menu selection
Setting target
Setting options (default setting underlined)

Input/Output Assign

Main Menu
Monitor Out
On the "Monitor Out" settings, you can select whether or
not to have the video sources' images output through the
HDMI output, as well as whether to have the onscreen
setup menu output through the HDMI output or through
an analog output.
If you connect your TV to HDMI output, "Monitor Out"
setting is automatically set so that the onscreen setup
menus are displayed and composite video, S-Video, and
component video sources are upconverted
Composite video, S-Video,
component video
Composite video, S-Video,
component video
Note
• See "Video Connection Formats"
how the "Monitor Out" and "Resolution" settings
affect the video signal flow through the AV receiver.
■
Monitor Out
HDMI Main:
Select this if your TV is connected to the HDMI
OUT MAIN.
HDMI Sub:
Select this if your TV is connected to the HDMI
OUT SUB.
Both:
Select this if your TVs are connected to the HDMI
OUT MAIN and HDMI OUT SUB. Video signals
are output from both HDMI outputs at the resolution
supported by both TVs.
En
48
Speaker Setup
Input/Output Assign
* and output.
HDMI
IN
OUT
HDMI
22) for charts showing
(➔
(➔
Both(Main):
Select this if your TVs are connected to the HDMI
OUT MAIN and HDMI OUT SUB. Video signals
are output from both HDMI outputs but HDMI OUT
MAIN will become a priority; depending on the reso-
lution, video signals may not be output from HDMI
OUT SUB.
Both(Sub):
Select this if your TVs are connected to the HDMI
OUT MAIN and HDMI OUT SUB. Video signals
are output from both HDMI outputs but HDMI OUT
SUB will become a priority; depending on the reso-
lution, video signals may not be output from HDMI
OUT MAIN.
Note
• For Deep Color output, if the "Monitor Out" setting is set to
"Both(Main)" or "Both(Sub)", the number of bit may be lim-
ited due to the capability of your TV connected to a priority out-
put.
■
Resolution
You can specify the output resolution for the HDMI
and COMPONENT VIDEO MONITOR OUT and have
the AV receiver upconvert the picture resolution as neces-
sary to match the resolution supported by your TV.
Through:
Select this to pass video through the AV receiver at
the same resolution and with no conversion.
Auto:
Select this to have the AV receiver automatically
convert video at resolutions not supported by your
TV.
480p (480p/576p):
Select this for 480p or 576p output and video con-
version as necessary.
720p:
Select this for 720p output and video conversion as
necessary.
1080i:
Select this for 1080i output and video conversion as
necessary.
1080p:
Select this for 1080p output and video conversion as
48)
necessary.
Tip
• The "Resolution" setting can be set for each "Monitor Out"
setting.
Note
• If the "Monitor Out" setting is set to "Both", this setting is fixed
at "Auto".
output