RocketFish RF-TVMP40 Assembly Manual page 8

STEP 4: Option 1 - Attaching the monitor plate to the TV
1 Align the monitor plate (C) with the screw holes on the back of the TV.
2 Install screws (M-A, M-B, M-C, M-D, M-E, M-F, M-G, or M-H) securely into the four holes in the back of the
TV, using washers (M-K or M-L) and spacers (M-I or M-J) as necessary. Do not over-tighten.
3 Continue to "STEP 5 - Determine wall-mount location" on page 11.
Note: The monitor plate (C) should be level on the back of the TV.
M-A M-B
or
You'll need
or
or
M-B (4)
M-A (4)
or
M-H (4)
M-G (4)
8
M-K
M-C or M-D
or
M-E or M-F
or
or
M-D (4)
M-C (4)
Phillips screwdriver
Need help? Call 800-620-2790
RF-TVMP40 TV Wall Mount
C
or
M-G or M-H
or
or
M-F (4)
M-E (4)
Level
M-I M-J
or
M-L
or
M-L (4)
M-K (4)
(C) Monitor
or
plate
M-I (4)
M-J (4)