RocketFish RF-TVMP40 Assembly Manual page 6

STEP 2 - Determine whether your TV has a flat back or an irregular or obstructed
back
1 With the monitor plate (C) and spider adapters (F) still on your TV, identify which type of back your TV may
have:
• Flat back: The monitor plate and adapters (if necessary) lay flush against the back of your TV and do
not block any jacks. You do not need spacers when assembling the wall mount.
• Obstructed back: The monitor plate and adapters (if necessary)
your TV. You will need spacers when assembling the wall mount.
• Irregularly-shaped back: There is a gap between the monitor plate and adapters (if necessary) and
some part of the back of your TV. You will need spacers when assembling the wall mount.
2 Remove the monitor plate and adapters.
6 Need help? Call 800-620-2790
RF-TVMP40 TV Wall Mount
block any of the jacks on the back of