RocketFish RF-TVMP40 Assembly Manual page 12

front
Horizontal
studs
Range of motion:
Arm fully extended from wall
Full up
side
front
Arm flat against the wall (left)
Full up
side
front
Arm flat against the wall (right)
Full up
side
Space requirements:
Distance from
the wall
12
top
top
If there is no available
stud for the TV location
you want, you can insert
horizontal studs into your
wall at the selected
mounting location.
side
top
side
top
side
front
top
24.5" (622 mm)
+ thickness of TV
18.2" (462 mm)
+ thickness of TV
side
Need help? Call 800-620-2790
RF-TVMP40 TV Wall Mount
Mounting considerations:
•Wall Mount Bracket MUST be attached to
a stud or solid concrete. DO NOT attach
this product to hollow wall or any other
configuration.
•Make sure that the arm will have desired
unobstructed range of motion: up-down,
side-to-side, in-out (see RANGE OF
MOTION).
•Make sure cables will reach their
destinations with enough remaining
slack to allow Arm full range of motion.
•Use the RANGE OF MOTION illustration
to familiarize yourself with the
movements of this product. Take into
account that the TV will change location
from side-to-side when pulled out from
the wall.
•Use the SPACE REQUIREMENTS
illustration for maximum measurements
of this products full range of motion.
Centered
front
top
Centered
front
top
Centered
front
top
Horizontal space requirements 34"
(858 mm) + width of TV*
*Assuming mounting holes are centered on TV.
Full down
side front top
Full down
side front
top
Full down
side front top
Vertical space
requirements 20"
(508 mm) +
height of TV*
front