RocketFish RF-TVMP40 Assembly Manual page 14

STEP 6 - Option 2: Installing on a solid concrete wall
1 Align the wall plate template (G) at the height you determined in the previous step and make sure that it is
level, then tape it to the wall. Use a pencil to mark the lag bolt hole locations (2). Remove the template.
2 Drill pilot holes to a depth of 2-3/4 in. (7 mm) using a 3/8 in. (10 mm) diameter masonry drill bit.
3 Insert the concrete wall anchors (W-C) into the pilot holes and use a hammer to make sure the anchors are
flush with the concrete surface.
4 Align the wall plate (D) with the anchors, insert the lag bolts (W-A) through the washers (W-B), then through
the holes in the wall plate, then tighten the lag bolts only until they are firm against the wall plate.
CAUTION: Avoid potential injuries or property damage!
DO NOT over-tighten the lag bolts (W-A).
You'll need
Parte superior Dessus
W-A (2)
Center of TV Mount Plate
<FR>Center of TV Mount
<SP>Center of TV Mount
"CENTER OF TV" can be placed at any
point along this arc line when the arm is
pushed in against the wall and mounted
at the centerline of your wood stud or
concrete wall.
"CENTER OF TV" can be placed at any <FR>LEFT TV ARC
point along this arc line when the arm is
pushed in against the wall and mounted
at the centerline of your wood stud or
concrete wall.
<SP>LEFT TV ARC
"CENTER OF TV" can be placed at any
point along this arc line when the arm is
at the centerline of your wood stud or pushed in against the wall and mounted
concrete wall.
W-C (2)
Level
14
D
W-B
W-A
Top Top
Parte superior Dessus
RF-TVMP40 Template • Gabarit • Plantilla
Outils nécessaires Tools Needed
Herramientas requeridas
Note
Remarque : Pour une construction à ossature de bois, localiser
d'abord les montants en bois, à l'aide d'un détecteur de montants. Centerline on Wood Stud or Concrete Wall
Nota: para la instalación en construcciones de armazón de madera,
Center of TV Mount Plate primero debe localizar las vigas de madera con un localizador de vigas. <FR>Centerline on Wood Stud or Center of TV Mount Plate
<FR>Center of TV Mount Concrete Wall <FR>Center of TV Mount
Plate <SP>Centerline on Wood Stud or
Plate
<SP>Center of TV Mount Concrete Wall <SP>Center of TV Mount
Plate Plate
Arm (Up, left) Arm (Up, right)
<FR>Arm (Up, left) <FR>Arm (Up, right)
<SP>Arm (Up, left) <SP>Arm (Up, right)
Arm (Center, left) Arm (Center, right)
<FR>Arm (Center, left) <FR>Arm (Center, right)
<SP>Arm (Center, left) <SP>Arm (Center, right)
Center of TV Mount Plate
Arm (Down, left) Arm (Down, right) <FR>Center of TV Mount
<FR>Arm (Down, left) <FR>Arm (Down, right) Vertical Space Requirements 20" (508 mm) + Height of TV*
Plate <SP>Arm (Down, left) 7.68" (195 mm) <SP>Arm (Down, right) <FR>Vertical Space Requirements 20" (508 mm) + Height of TV* Plate
<FR>7.68" (195 mm) <SP>Vertical Space Requirements 20" (508 mm) + Height of TV* <SP>Center of TV Mount
Plate <SP>7.68" (195 mm)
Plate
LEFT TV ARC RIGHT TV ARC
"CENTER OF TV" can be placed at any
point along this arc line when the Arm
is pushed in against the wall and
Mounting Holes mounted at the centerline of your
Wood Stud or Concrete Wall.
<FR>Mounting "CENTER OF TV" can be placed at any <FR>RIGHT TV ARC
point along this arc line when the Arm
Holes is pushed in against the wall and
Wall Mount Bracket mounted at the centerline of your
<SP> Wood Stud or Concrete Wall.
<FR>Wall Mount <SP>RIGHT TV ARC Tape
Mounting Holes "CENTER OF TV" can be placed at any
Bracket point along this arc line when the Arm
<SP>Wall Mount mounted at the centerline of your is pushed in against the wall and
Wood Stud or Concrete Wall.
Center of TV Mount Plate Bracket Center of TV Mount Plate
<FR>Center of TV Mount <FR>Center of TV Mount Distance from the Wall <FR>Distance from the Wall
Plate Plate <SP>Distance from the Wall
<SP>Center of TV Mount <SP>Center of TV Mount
Plate Plate
17" (429 mm) 13" (323 mm) 10" (256 mm) 10" (256 mm) 13" (323 mm) 17" (429 mm)
<FR>17" (429 mm) <FR>13" (323 mm) <FR>10" (256 mm) <FR>10" (256 mm) <FR>13" (323 mm) <FR>17" (429 mm)
<SP>17" (429 mm) <SP>13" (323 mm) <SP>10" (256 mm) <SP>10" (256 mm) <SP>13" (323 mm) <SP>17" (429 mm)
<FR>side side
Distance between mounting holes and center of TV when in horizontal position and pushed in against the wall. <SP>side 18.19" (462 mm) + Thickness of TV
<FR>Distance between mounting holes and center of TV when in horizontal position and pushed in against the wall. <FR>18.19" (462 mm) + Thickness of TV
<SP>Distance between mounting holes and center of TV when in horizontal position and pushed in against the wall. <SP>18.19" (462 mm) + Thickness of TV 24.5" (622 mm) + Thickness of TV
<FR>24.5" (622 mm) + Thickness of TV
<SP>24.5" (622 mm) + Thickness of TV
V1 13-0239
G Template
W-B Washer (2)
Need help? Call 800-620-2790
RF-TVMP40 TV Wall Mount
W-C
Edge-to edge
D Wall
stud finder
plate
2-3/4 in.
(70 mm)
1/2" socket
wrench
Drill
3/8" masonry drill bit
Hammer
Pencil