Removing The Stand Cover; Installing The Stand Cover; Removing The Vesa Stand - Dell OptiPlex 3011 AIO Owner's Manual

5. heat sink
6. memory
7. system board
8. coin-cell battery
9. speaker
10. WLAN card slot
11. hard drive
12. communication port
13. power switch
14. chassis

Removing the Stand Cover

1. Follow the procedures in
2. Place the computer on a flat surface, display side facing downwards.
3. Press the tab in to release the stand cover and remove it from the computer.

Installing the Stand Cover

1. Slide the stand cover into its place and press to secure it to the computer.
2. Follow the procedures in

Removing the VESA Stand

1. Follow the procedures in
2. Remove the stand cover.
3. Remove the screws that secure the VESA stand to the computer and remove the VESA stand from the computer.
10
Before Working Inside Your Computer .
After Working Inside Your Computer .
Before Working Inside Your Computer .