Dell OptiPlex 3011 AIO Owner's Manual page 48

Option
Server IP Address
Server Port
Client Address Method
Client IP Address
Client SubnetMask
Client Gateway
Advanced
Table 13. Image Server
License Status
Table 14. System Logs
Option
BIOS events
48
Description
NOTE: This option is relevant only when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
This option specifies the primary static IP address of the Cloud Desktop Server with
which the client software communicates. The default Server IP Address is
255.255.255.255
NOTE: This option is relevant only when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
This option specifies the primary IP port of the Cloud Desktop with which the client
software communicates. The default Server Port value is 06910.
NOTE: This option is relevant only when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
This option specifies how the client obtains its IP address. The options are:
• Static IP - Uses the static IP address
• DHCP - Obtains IP addresses using DHCP. This option is selected by default
NOTE: This option is relevant only when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
This option specifies the static IP address of the client. The default IP Address is
255.255.255.255
NOTE: This option is relevant only when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
This option specifies the subnet mask IP address of the client. The default IP Address
is 255.255.255.255
NOTE: This option is relevant only when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
This option specifies the gateway IP address of the client. The default IP Address is
255.255.255.255
NOTE: This option is relevant only when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
This option allows you to enable the Verbose Mode.
• Verbose Mode
Displays the EasyConnect Embedded license status.
Description
Displays the system event log and allows you to clear the log.
• Clear Log