Removing The Camera; Installing The Camera - Dell OptiPlex 3011 AIO Owner's Manual

m) VESA stand
n) stand cover
5. Follow the procedures in

Removing the Camera

1. Follow the procedures in
2. Remove:
a) stand cover
b) VESA stand
c) back cover
d) system board cover
e) WLAN card
f) memory
g) heat sink
h) hard drive
i) optical drive
j) control board
k) system fan
l) intrusion switch
m) power switch
n) system board
o) display bracket
3. Remove the screws that secure the camera to the computer and remove it from the computer.

Installing the Camera

1. Place the camera on the computer.
2. Tighten the screws to secure the camera to the computer.
3. Install:
a) display bracket
b) system board
After Working Inside Your Computer .
Before Working Inside Your Computer .
35