Ipod Cannot Be Played Back - Marantz SR7008 Owner's Manual

Contents

2 iPod cannot be played back

Symptom
iPod cannot be connected.
'
The AirPlay icon is not displayed
on iTunes / iPhone / iPod touch / iPad.
Audio is not output.
Audio is interrupted during the AirPlay
playback on iPhone / iPod touch /
iPad.
iTunes cannot be played back through
the remote control unit.
Front panel Display
Connections Playback
• When using iPod by connecting it to the USB port, some iPod variations are not supported.
• When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
recognized. Use a genuine USB cable.
• This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN).
Connect it to the same LAN as this unit.
• The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the
firmware to the latest version.
• The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on
iTunes / iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume
level.
• The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon
the iTunes / iPhone / iPod touch / iPad screen and select this unit.
• Quit the application running in the background of the iPhone/iPod touch/iPad, and then play
using AirPlay.
• Some external factors may be affecting the wireless connection. Modify the network
environment by taking measures such as shortening the distance from the wireless LAN
access point.
• Enable the "Allow iTunes audio control from remote speakers" setting on iTunes. Then, you
can perform playback, pause, and skip operations through the remote control unit.
Rear panel
Settings
Cause/Solution
236
Remote
Tips Appendix
Page
'
on
Index
50
–
53
–
–
107
–
–
–