Distances - Marantz SR7008 Owner's Manual

Av surround receiver
Hide thumbs Also See for SR7008:
Table of Contents

Advertisement

Contents
2 Front Height
Set the presence and size of the front height speakers.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
None : Select when the front height speakers are not connected.
%
• When "Assign Mode" (vpage 192) setting is "9.1ch(SB/FH/FW)",
"7.1ch + ZONE2", "7.1ch(Bi-Amp)" or "7.1ch + Front B", you can make the
"Surr. Back" setting.
2 Front Wide
Set the presence and size of the front wide speakers.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
None : Select when the front wide speakers are not connected.
%
• When "Assign Mode" (vpage 192) setting is "9.1ch(SB/FH/FW)",
"7.1ch + ZONE2", "7.1ch(Bi-Amp)" or "7.1ch + Front B", you can make the
"Surr. Back" setting.
Front panel
Display
Connections
Playback
Rear panel
Settings

Distances

Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
2 Unit
Set the unit of distance.
Feet (Default)
Meters
2 Step
Set the minimum variable width of the distance.
1ft (Default) / 0.1ft
0.1m / 0.01m
195
Remote
Tips
Appendix
Index

Advertisement

Table of Contents
loading

Table of Contents