Marantz SR7008 Owner's Manual page 189

Contents
13
Select "Store" and then press ENTER.
Save the measurement results.
Audyssey Setup
Check processing results. To proceed, press "Store".
Speaker Config.
Distances
Levels
Crossovers
Store
• Saving the results requires about 30 seconds.
NOTE
• During saving of measurement results, be sure not to turn off the power.
14
Unplug the Setup and measurement microphone from
the unit's SETUP MIC jack.
Front panel Display
Connections Playback
Rear panel
Settings
15
Set Audyssey Dynamic Volume ® .
You can set Dynamic Volume function, which automatically
adjust volume level for all content.
Do you want to enable?
• This feature adjusts the output volume to the optimal level while
constantly monitoring the level of the audio input to the unit.
Optimal volume control is performed automatically without any
loss in the dynamism and clarity of the sound when, for example,
the volume suddenly increases for commercials shown during
television programs.
NOTE
• After performing Audyssey® Setup, do not change the speaker connections or
subwoofer volume. In event of a change, perform Audyssey® Setup again.
189
Remote
Tips Appendix
Audyssey Setup
Yes
No
Index