Hdmi Control Function; Setting Procedure - Marantz SR7008 Owner's Manual

Av surround receiver
Hide thumbs Also See for SR7008:
Table of Contents

Advertisement

Contents

HDMI control function

A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection. Not all HDMI-equipped devices have this capability.

Setting procedure

1
Set the HDMI output connector corresponding with the
HDMI control function.
Set "HDMI Control" (vpage 174) to "On".
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI control function for all devices connected
by HDMI cable.
• Please consult the operating instructions for the connected
devices to check the settings.
• Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input connected
to this unit.
Front panel
Display
Connections
Playback
Rear panel
Settings
5
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
6
When you turn the TV's power to standby, check that
the power of this unit also goes to standby.
NOTE
• Some functions may not operate depending on the connected TV or player. Check
the owner's manual of each device for details beforehand.
• The HDMI ZONE2 function is not compatible with the HDMI control function.
• When the HDMI ZONE2 function is used with "HDMI Control" in the menu set to
"On", the HDMI ZONE2 function may not fully work.
132
Remote
Tips
Appendix
Index

Advertisement

Table of Contents
loading

Table of Contents