Marantz SR7008 Owner's Manual page 187

Av surround receiver
Hide thumbs Also See for SR7008:
Table of Contents

Advertisement

Contents
6
Select "Begin Test" and then press ENTER.
• Measurement requires several minutes.
NOTE
• If "Caution!" is displayed on TV screen:
Go to "Error messages" (vpage  190). Check any related items, and
perform the necessary procedures.
• If the volume level for the subwoofer is not appropriate, an error message
is displayed. See "Subwoofer level error message and how to adjust"
(vpage 191).
n When measuring has stopped
q Press BACK to display the popup screen.
w Press o to select "Yes", and then press ENTER.
7
The detected speakers are displayed.
Audyssey Setup
Speaker Detection
Front
Center
Subwoofer
Surround
Surr. Back
Front Height
Front Wide
Repeat Last Test
Front panel
Display
Connections
Playback
:Yes
:Yes
:1 spkr
:Yes
:No
:No
:No
Next
Rear panel
Settings
8
Select "Next" and then press ENTER.
9
Move the Setup and measurement microphone to
position 2, select "Continue", and then press ENTER.
The measurement of the second position starts. Measurements
can be made in up to eight positions.
Place the microphone at ear level at the 2nd listening position,
then select "Continue"...
Calculation
%
• To skip measuring the second and subsequent listening position, use
select "Calculation" and press ENTER to proceed to step 12.
187
Remote
Tips
Appendix
Audyssey Setup
Continue
Back
Index
i
to

Advertisement

Table of Contents
loading

Table of Contents