General; Language; Zone2 Setup / Zone3 Setup - Marantz SR7008 Owner's Manual

Contents

General

Make various other settings.

Language

Set the language for display the menu on the TV screen.
English (Default) / Français / Español
%
• "Language" can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1. Press and hold the main unit's STATUS and ZONE SELECT for at least 3
seconds.
"zVideo Format <NTSC>" appears on the display.
i
2. Press the main unit's .
"zGUI Language <ENGLISH>" appears on the display.
o p
3. Use the main unit's
and set the language.
4. Press the main unit's ENTER to complete the setting.
Front panel Display
Connections Playback
Rear panel
Settings

ZONE2 Setup / ZONE3 Setup

Set the audio to play back with multi-zone (ZONE2, ZONE3).
%
• Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale" (vpage 166).
2 Bass
Adjust bass.
–14dB – +14dB (Default : 0dB)
2 Treble
Adjust treble.
–14dB – +14dB (Default : 0dB)
2 High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On : The low range is attenuated.
Off (Default) : The low range is not attenuated.
203
Remote
Tips Appendix
Index