Marantz SR7008 Owner's Manual page 210

Av surround receiver
Hide thumbs Also See for SR7008:
Table of Contents

Advertisement

Contents
2 Add New Feature
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade Package : Display the items to be upgraded.
Upgrade Status : Display a list of the additional functions provided by
the upgrade.
Upgrade Start : Execute the upgrade process. When the upgrade
starts, the menu screen is shut down. During the
upgrade, the amount of upgrade time which has
elapsed is displayed.
%
• See the Marantz website for details about upgrades.
• When the procedure is complete, "Registered" is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, "Not
Registered" is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main unit's
and SETUP for at least 3 seconds.
• If the upgrade is not successful, an error message identical to those in
"Update" will appear on the display. Check the settings and network
environment and then perform the upgrade again.
Front panel
Display
Connections
Playback
Rear panel
Settings
Notes concerning use of "Update" and "Add New Feature"
• In order to use these functions, you must have the correct system
requirements and settings for a broadband Internet connection
(vpage 53).
• Do not turn off the power until updating or upgrading is completed.
• Even with a broadband connection to the Internet, approximately 1
hour is required for the updating/upgrading procedure to be completed.
• Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed. Furthermore,
there may be cases where backup data is reset for the parameters,
etc., set on this unit.
• If the update or upgrade fails, press and hold the X on the main unit
for more than 5 seconds, or remove and re-insert the power cord.
"Update retry" appears on the display and update restarts from the
point at which update failed. If the error continues despite this, check
the network environment.
%
o
• Information regarding the "Update" function and "Add New Feature" will be
announced on the Marantz web site each time related plans are defined.
210
Remote
Tips
Appendix
Index

Advertisement

Table of Contents
loading

Table of Contents