Connecting To A Pc - FujiFilm FinePix FinePix S9600 Owner's Manual

6.3 CONNECTING TO A PC

6.3.1 Connecting to a PC
The "Connecting to a PC" section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.
Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera to the PC before installing
all the software.
¶ DSC (Mass storage device) mode
This mode provides a simple way to read images from a media and store images onto a media.
1
Gold
contact
area
Gold marking
2
1 0
2 0
DSC DSC
:
OK OK
1
: SET SET
2
: SET SET
:
ENGLISH ENGLISH
3
: SET SET
4 :
126
CD-ROM
(Software for FinePix
Insert the media into the camera.
w
1 Set the Power switch to " " to turn the camera
on.
¶ ò
2 Select " " DSC in " " USB MODE in the
˜
" " SET-UP menu (➡P.100).
3 Turn the camera off.
●
!
Use the AC Power Adapter AC-5VX (sold separately) for the
connection (➡P.121). If shutting off power supply during
communication, the files on the media may be damaged.
●
!
If inserting an xD-Picture Card and a CF/Microdrive into the
camera at the same time, images will be recorded onto the
media selected as the " ¡ " MEDIA (➡P.100).
6.3 CONNECTING TO A PC
3
Camera
4
CX
)
Camera operation
◆
When displaying [COMMUNICATION ERROR]
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
1 Turn your PC on.
PC
2 Connect the camera to the PC using the USB
cable (mini-B).
●
!
USB socket Make sure that the USB cable (mini-B) is connected correctly
and pushed in.
w
Set the Power switch to " ".
h When the camera and PC are exchanging data,
the indicator lamp blinks orange.
¶
h " DSC" appears on the screen.
h Auto power off is disabled during USB
connection.
●
!
Before replacing the media, always disconnect the camera
from the PC. See P.129 for information on the disconnection
procedure.
●
!
Do not disconnect the USB cable (mini-B) when the camera
is communicating with a PC. See P.129 for information on the
disconnection procedure.
◆
If "CHECKING USB" appears
[COMMUNICATION ERROR] is displayed on the
¶
screen, " " (DSC mode) is not selected in "
USB MODE. Disconnect the USB cable (mini-B) to
the camera and restart the procedure from step
and then
ò
"
1
.
6
Continued 127