FujiFilm FinePix FinePix S9600 Owner's Manual page 25

PHOTOGRAPHY FUNCTIONS
CONTINUOUS AF
Use this button to take pictures of a moving subject. Using Continuous AF mode reduces the time
required for focusing.
1
2
6 6
N N N
ISO 200 ISO 200 ISO 200
320 320 F5 F5.6 320 320 F5.6 F5.6
3
Bebeep
320 F5 F5.6 320 320 320 F5.6 F5.6
4
Click
◆ ◆
Notes on continuous AF
Because the camera focuses continuously without pressing the shutter button, note the
following:
i Watch the battery level carefully since the camera consumes more power in this mode than in other
Focus modes (S-AF and MF).
i If the Auto power off function is set to "OFF", particular attention must be given to the battery level.
48
Available Photography modes:
B, √, À, U, ,, /, N, M, <, >
Set the Focus mode selector switch to "C-AF".
Frame the shot so that the subject fills the entire AF
frame.
The camera continues to focus on the main subject
in the AF frame.
Press the shutter button down halfway. When a
short double-beep is heard, the camera focuses on
your subject. The AF frame on the screen becomes
smaller and the camera sets the shutter speed and
aperture. The indicator lamp (green) changes from
blinking to lit.
Press the shutter button down fully. When a
clicking sound is heard, the camera records the
image.
PHOTOGRAPHY FUNCTIONS
MANUAL FOCUS
Use manual focus to lock the focus for a shot.
1
1 0
2 0
N N N 6 6
ISO 200 ISO 200 ISO 200
320 320 F5 F5.6 320 320 F5.6 F5.6
2
0 1
2 0
N N N 6 6
ISO 200 ISO 200 ISO 200
320 F5 F5.6 320 320 320 F5.6 F5.6
0 3
Close range Long range
◆ ◆
One-touch AF function
Use this function to focus the shot quickly.
—
Pressing the " " button, the camera uses the autofocus function to focus on the subject.
●
!
The focus indicator does not appear in One-touch AF mode.
N N N 6 6
ISO 200 ISO 200 ISO 200
320 320 F5 F5.6 320 320 F5.6 F5.6
Available Photography modes:
B, √, À, U, ,, /, N, M, <, >
1 Set the Focus mode selector switch to "MF".
R
2 The " " appears on the screen.
●
!
If the focus is set to infinity using manual focusing, position the
•
" " mark on a subject close to infinity. Continuing to turn the
focus ring will move the focus position beyond infinity and
defocus the image.
●
!
Manual focus cannot be used in the " r " Movie mode.
◆ ◆
Using manual focus effectively
The image is unfocused when the camera moves.
Use a tripod to prevent camera shake.
1 Press " — " button to focus on the subject in
the focus frame.
2 A focusing indicator mark appears on the
•
screen. Check whether " " mark appears in
yellow.
•
3 When the " " mark is not yellow, turn the focus
•
ring until the " " mark appears in yellow.
■ Focusing indicator marks
The focusing mark appears when the focus is close
to the focused position. Use the mark to focus the
shot.
•
(Yellow) The shot is focused.
The focus is set too close. Turn the focus
π
ring clockwise.
The focus is set too far. Turn the focus ring
º
counterclockwise.
' Focus check function
Use this function when it is difficult to see whether
the image is focused.
'
Pressing the " " button, the center of the image is
shown enlarged and can be focused using the
enlarged image. Take the picture or press the "
button again to return to normal display.
●
!
Ï
Focus check function can be used in the " " CENTER and
"MF" mode.
●
!
Focus check function is disabled when setting the High-speed
shooting mode or setting " µ " EVF/LCD MODE to "60 fps" in
the " ˜ " SET-UP menu.
3
'
"
49