Úimage Rotate - FujiFilm FinePix FinePix S9600 Owner's Manual

Ò ERASING SINGLE / ALL FRAMES
PLAYBACK MENU
ERASE OK? ERASE OK?
YES YES CANCEL CANCEL
1 0 2 0
ERASE ALL OK? ERASE ALL OK?
IT MAY TAKE A WHILE IT MAY TAKE A WHILE
YES YES CANCEL CANCEL
◆
To stop the procedure midway
CANCEL CANCEL
76
FRAME
1 Press "d" or "c" to select the erasing frame
(file).
2 Press the "MENU/OK" button to erase the
currently displayed frame (file).
To erase another frame (file), repeat steps 1 and
2.
When erasing frames (files) is completed, press the
"DISP/BACK" button.
●
!
Pressing the "MENU/OK" button repeatedly erases
consecutive frames (files). Take care not to erase a frame
(file) by mistake.
●
!
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.84).
ALL FRAMES
Pressing the "MENU/OK" button erases all the
frames (files).
●
!
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.84).
◆
Press the "DISP/BACK" button to cancel erasing of
all the frames (files). Some unprotected frames (files)
will be left unerased.
●
!
Even if you stop the procedure immediately, some frames
(files) will be erased.
Ú IMAGE ROTATE
PLAYBACK MENU
1
0 1 2 0
2
1 0 2 0
IMAGE ROTATE IMAGE ROTATE
1 SET SET
2
3
0 1 0 2
SET SET CANCEL CANCEL
◆ ◆
Images that can be rotated
You may not be able to rotate images that were shot with a camera other than the FinePix S9100 /
FinePix S9600.
Use this mode to rotate an image photographed
with FinePix S9100 / FinePix S9600.
1 Set the Power switch to " w
".
2 Press the "MENU/OK" button to display the
menu on the screen.
Ú
1 Press "a" or "b" to select " " IMAGE ROTATE.
2 Press "c".
●
!
When [PROTECTED FRAME] appears, unprotect the frame
(➡P.84).
1 Press "a" or "b" to rotate and display the image.
2 Press "MENU/OK" button to confirm your
selection. Press the "DISP/BACK" button to
cancel rotating the image.
●
!
An image can be rotated when playing back using FinePix
S9100 / FinePix S9600 and FinePixViewer (included).
3
77