Installation On A Mac Os X (Hyper-Utility2) - FujiFilm FinePix FinePix S9600 Owner's Manual

5.5 INSTALLATION ON A Mac OS X (Hyper-Utility2)

Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
✽1
Power Mac G4 (except for PCI Graphic)/G5, PowerBook G4/MacBook,
Compatible Mac
MacBook Pro/Mac mini
Operating System Mac OS X (compatible with version 10.3 to 10.4.6)
RAM 256 MB minimum (512 MB or more recommended)
Hard disk space Amount required for installation: 100 MB minimum
Amount required for operation: 1 GB minimum
1024 × 768 to 3840 × 2400 pixels, Thousands color or higher (1600 ×
Display
1200 pixels, Millions Color recommended)
✽3
Sound functions Speakers
CD-ROM drive
Required for software installation
✽4
Interface FireWire 400 (IEEE 1394) interface
✽1 PowerPC, Intel processor loaded
✽2 This software will not run correctly in the Mac OS X Classic environment.
✽3 Sound functions are required to play background music for slide shows.
✽4 Required to connect the FinePix S2 Pro, FinePix S3 Pro or FinePix S20 Pro and use the Remote Shooting function.
118
Installing Hyper-Utility2
1
2
✽2
3
4
5
6
7
Switch your Macintosh on and start up Mac OS X. Do not launch any other applications.
Load the enclosed CD-ROM into the CD-ROM drive. The "HS_V2" window opens.
●
!
If the "HS_V2" window does not open automatically, double-click the CD-ROM icon.
Double-click "Installer".
A confirmation message appears asking
whether you want to continue with the
installation. Click the [OK] button.
Enter the administrator name and password.
Then click the [OK] button.
The installer setup window appears.
Click the [Continue] button.
5
Continued 119