Taking Pictures ( Auto Mode) - FujiFilm FinePix FinePix S9600 Owner's Manual

BASIC OPERATION GUIDE
Focus ring
The camera focuses on
the subject using Manual
focus mode.
Zoom ring
Turn the zoom ring to
take pictures with zoom
function.
Macro button
Use this for close-up shots. Pressing this button changes the modes as follows:
Macro Super macro
Focal range: Normal
Macro
Super macro Approx. 1 cm to 1 m (0.4 in. to 3.3 ft.) (Wide-angle only)
◆
Displaying the on-screen Help
Instructions for the next step in the procedure
appear at the bottom of the screen. Press the
button indicated.
In the right side screen, press the "MENU/OK"
button to erase the displayed frame. To cancel
erasing, press the "DISP/BACK" button.
22 22
Flash pop-up button
To use the flash, press the flash pop-up button to
release the flash.
INFO (information check) button
Press this button to view image information.
Photography mode: Displays the current
settings (white balance, sharpness, etc.)
and histogram.
Playback mode: Displays the information
for the image currently displayed.
One-touch AF button
Focus the image once. This can only
be used for manual focusing.
Focus mode selector switch
Changes among C-AF (Continuous
AF), S-AF (Single AF) and MF (Manual
focus).
Macro off (Normal)
Wide-angle: approx. 40 cm (1.3 ft.) to infinity
Telephoto: approx. 2 m (6.6 ft.) to infinity
Wide-angle: approx. 10 cm to 3 m (3.9 in. to 9.8 ft.)
Telephoto: approx. 90 cm to 3 m (3.0 ft. to 9.8 ft.)
◆
E R A S E E O K ? E R A S O K ?
Y E S Y E S C A N C E L C A N C E L
Y E S Y E S C A N C E L C A N C E L
TAKING PICTURES ( AUTO MODE )
PHOTOGRAPHY MODE
1
1 0 2 0
3 0
2
3
Diopter adjustment dial
EVF
LCD
q
1 Set the Power switch to " ".
2 Set the Mode dial to " B
".
3 Set the Focus mode selector switch to "S-AF".
h Focal range
Wide-angle: approx. 40 cm (1.3 ft.) to infinity
Telephoto: approx. 2 m (6.6 ft.) to infinity
●
!
Use Macro mode for subjects closer than 50 cm (1.6 ft.)
(➡P.50).
●
!
When [CARD ERROR], [CARD NOT INITIALIZED], [CARD
FULL] or [NO CARD] appears, see P.142.
Press the Flash pop-up button to pop up the flash.
●
!
When the flash pops up, the image may disappear and go
dark briefly due to flash charging. The indicator lamp blinks
orange during charging.
●
!
If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash mode
to fix the problem.
Press the "EVF/LCD" button to alternate the display
between the viewfinder (EVF) and the LCD
monitor.
When the AF frame in the viewfinder (EVF) is
difficult to see, adjust the viewfinder using the
Diopter adjustment dial.
The EVF/LCD selection is retained even when the
camera is off or the mode setting is changed.
Continued
2
23