Installation On A Mac Os X - FujiFilm FinePlx S5700 Owner's Manual

Installation on a Mac OS X

Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
1
Compatible Mac
*
Operating System
RAM
Hard disk space
Display
Internet connection
*
1
* PowerPC, Intel processor loaded
2
* Models with a USB port as a standard feature
3
* Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable. The software may not operate correctly if you use an extension
cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
132
Downloaded from ManualsCamera.com Manuals
Power Macintosh G3
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini
Mac OS X (compatible with version 10.3.9 to 10.4.8)
256 MB minimum
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
• To use the FinePix Internet Service or mail attachment function:
3
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
2 2
, PowerBook G3 ,
* *