Call Screening; Number Of Rings - AT&T ML17939 User Manual

Menu setup
Answering system settings

Call screening

Use this feature to set whether incoming messages are played through the
speaker while they are being recorded. Call screening is on by default.
1. When the telephone is idle, press MENu.
2. Press or
3. Press or
select the desired line. Press ENTER.
4. Press or
5. Press or
6. Press or
Press ENTER to save your selection. The telephone
7.
plays a confirmation tone and returns to the
previous menu.

Number of rings

Use this feature to set how many times the telephone rings before the
answering system picks up the call. You can select two, four, six or toll saver,
which is explained below. The number of rings is four by default.
When the telephone is idle, press MENu.
1.
2. Press or
3. Press or
select the desired line. Press ENTER.
4. Press or
5. Press or
6. Press or
• Toll saver - the answering system answers a call
after two rings if you have new messages, and
after four rings when there are no new messages. This feature allows
you to check for new messages and avoid paying long distance charges
when calling from out of your local area.
7. Press ENTER to save your selection. The telephone plays a confirmation
tone and returns to the previous menu.
to scroll to Answering sys. Press ENTER.
to scroll to Mailbox 1 or Mailbox 2 to
to scroll to Ans sys setup. Press ENTER.
to scroll to Call screening. Press ENTER.
to select on or off.
to scroll to Answering sys. Press ENTER.
to scroll to Mailbox 1 or Mailbox 2 to
to scroll to Ans sys setup. Press ENTER.
to scroll to # of rings. Press ENTER.
to select 2, 4, 6 or Toll saver.
24
aNS SyS SETUP M1 aNS SyS SETUP M1
Call screening Call screening
# of rings # of rings
Msg length Msg length
CaLL SCREENING CaLL SCREENING
On On
Off Off
aNS SyS SETUP M1 aNS SyS SETUP M1
Call screening Call screening
# of rings # of rings
Msg length Msg length
# OF RINGS # OF RINGS
2 2
4 4
6 6
1 1
1 1
1 1
1 1