Priority Code; Message Alert Tone - AT&T ML17939 User Manual

Menu setup
Answering system settings

Priority code

Priority calling allows a caller to enter a code during the outgoing
announcement that plays a special tone so that you know who is calling.
To enable a priority call, set the priority code to on and enter a three-digit
priority code (000-999). If you do not use this feature, set the priority code
to off. The default priority code is 999. To change the settings:
When the telephone is idle, press MENu.
1.
2. Press or
3. Press or
select the desired line. Press ENTER.
4. Press or
5. Press or
6. Press or
If you select on, do the following:
a. Press ENTER.
b. Press the dialing keys (0-9) to enter a three-
digit code. Press /
the cursor to the left or right. Press DELETE to
backspace and erase a digit.
c. Press ENTER to save the digits.
-oR-
If you select off, press ENTER to save your selection.
The telephone plays a confirmation tone and returns to the previous menu.

Message alert tone

If you turn this feature on, the telephone beeps every 10 seconds when there
are new messages. The tone stops when all new messages have been played.
1. When the telephone is idle, press MENu.
2. Press or
3. Press or
select a desired mailbox. Press ENTER.
4. Press or
5. Press or
6. Press or
Press ENTER to save your selection. The telephone plays
7.
a confirmation tone and returns to the previous menu.
NOTE: The answering system must be turned on for the message alert tone to function.
to scroll to Answering sys. Press ENTER.
to scroll to Mailbox 1 or Mailbox 2 to
to scroll to Ans sys setup. Press ENTER.
to scroll to Priority code. Press ENTER.
to select on or off.
REPEAT
to scroll to Answering sys. Press ENTER.
to scroll to Mailbox 1 or Mailbox 2 to
to scroll to Ans sys setup. Press ENTER.
to scroll to Msg alert tone. Press ENTER.
to select on or off.
or / to move
SKIP
26
aNS SyS SETUP M1 aNS SyS SETUP M1
Msg length Msg length
Remote code Remote code
Priority code Priority code
PRIORITy CODE PRIORITy CODE
On On
Off Off
PRIORITy CODE PRIORITy CODE
aNS SyS STEUP M1 aNS SyS STEUP M1
Remote code Remote code
Priority code Priority code
Msg alert tone Msg alert tone
MSG aLERT TONE MSG aLERT TONE
On On
Off Off
1 1
1 1
1 1
99_ 99_
1 1
1 1