Depression On The Leading Edge Is Left; The Size Of Clear Film Cannot Be Detected; Roll Paper Is Continuously Ejected - Canon imagePROGRAF iPF755 User Manual

Troubleshooting

Depression on the leading edge is left

Keeping a roll in the printer for a long
time without printing on it may leave a de-
pression on the leading edge.

The size of clear film cannot be detected

The Platen is soiled with ink or other substances.

Roll Paper is Continuously Ejected

Cause
Although sheets are
selected as the paper
source, a roll was ad-
vanced.
12
834
Depression on the leading edge is left
> Problems Regarding Paper
Cause
Cause
After roll ejection stops, follow these steps to reload the roll.
1. Push the Release Lever back.
2. Open the Roll Cover.
3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time,
ensure that both ends of the roll are rewound evenly.
4. Pull the Release Lever forward.
5. Load the roll. At this time, be sure to press the Load button and select Load Roll Paper.
(See "Loading Rolls in the Printer.")
>
When printing quality is most important, we recommend setting Tri-
mEdge Reload to On or Automatic so that the paper edge is automati-
cally cut before printing.
(See "Menu Structure.")
Corrective Action
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
Corrective Action
→P.630
Corrective Action
→P.704
→P.811
iPF755