Menu Structure - Canon imagePROGRAF iPF755 User Manual

Printer Parts > Control Panel
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to complete the settings, and then press the OK button.
Executing menu commands
Menu commands can be executed as follows.
1.
Press ▲ or ▼ to select the action to execute, and then press the OK button.
The menu command is now executed.

Menu Structure

The menu structure is organized by tabs, as follows. Values at right indicated by an asterisk are the defaults.
• Paper Menu
• Ink Menu
• Job Menu
• Set./Adj. Menu
9
For instructions on menu operations, see "Menu Operations."
For details on menu items, see "Menu Settings."
Paper Menu
First Level
Load Paper
Eject Paper
Chg. Paper Type
( *1
→P.706
Chg. Paper Size
704
ManageRemainRoll
Paper Details
Menu Structure
>
Note
• Hold down ▲ or ▼ to increase or decrease the value continuously.
Note
• If a confirmation message is displayed regarding the setting you entered, press the OK button. The
setting is applied, and the printer is now in Standby.
→P.704
→P.706
→P.706
→P.707
Second Level
Roll Paper
Cut Sheet
Roll Paper
)
Cut Sheet
Sheet Size
Roll Length ( *3
→P.706
Roll Width ( *4
→P.706
Off *
On
(The paper type is
displayed here.)
( *1 )
→P.706
→P.701
→P.716
Third Level Fourth Level
(The paper type is displayed here.) ( *1
(The paper type is displayed here.) ( *1
(The size of paper is displayed here.) ( *2
)
)
Head Height Automatic *
Highest
High
Fifth Level
)
→P.706
)
→P.706
)
→P.706
iPF755