Canon imagePROGRAF iPF755 User Manual page 739

GL2 Line & Smoothing
Set- Pen
tings Man-
ager
ThickenFineLines
AdjustFaintLines
Proc- Warning
essin-
gOp-
On-the-Fly
tion
PageSizeProcess1
PageSizeProcess2
GL2 Set Print
Inter- EOP Timer
face
Setup
TCP/ IPv4
IP
iPF755
Setting Item
IPv4 Mode
Printer Parts
Description, Instructions
• If you choose Software
Operation is determined by the application. If
nothing is specified by the application, the result is
as shown in the figure.
Note: By default, this is a 72-sided figure
• If you choose Smooth
Select On to print fine lines more distinctly.
If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help pro-
duce the expected results. However, lines in some
colors may appear broken.
Select On to have any GL2-related warnings dis-
played.
Selecting On will start printing jobs sooner if you are
printing only HP RTL print jobs and printing would
not start until later. However, images may be incom-
plete in some cases, so be sure to check the printing
results.
Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
Selecting On will determine the paper size based on
the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered man-
ually.
> Control Panel >
9
723
Menu Settings