Configuring The Printer's Tcp/Ip Network Settings - Canon imagePROGRAF iPF755 User Manual

Network Setting
For details on configuring printer settings for networks, refer to the following topics.

• Configuring the Printer's TCP/IP Network Settings

• Configuring the Printer's AppleTalk Network Settings
• Configuring the Printer's NetWare Network Settings
• Specifying Printer-Related Information
Note
• RemoteUI also offers many other features. You can display the ink levels, check error messages and other
status information, and cancel print jobs.
• By factory default, the English screen is displayed. To change the display language, select the desired lan-
guage under Language before logging on in administrator mode.
• If you login in Administrator Mode, you can configure to use the Jumbo Frame function in the Network
page. However, this function might not be able to be used depending on the network environment.
Important
• Use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later as a web browser.
In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later.
• Access is not possible via a proxy server. In environments where a proxy server is used, add the printer's IP
address to Exceptions (addresses accessed without a proxy server) in the web browser proxy server settings.
(Settings may vary depending on the network environment.)
• Enable JavaScript and cookies in the web browser.
• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings are cor-
rectly configured.
• RemoteUI might not be able to start depending on the network environment.
• Check that Use RemoteUI in System Setup is set to On in the printer Control Panel.
10
Configuring the Printer's TCP/IP Network Settings
Follow the steps below to configure the TCP/IP network settings.
When using an IPv4 IP address
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
760
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page.
Configuring the Printer's TCP/IP Network Settings
> Network Setting >
→P.760
→P.778
→P.768
→P.763
iPF755