To Install Usb Fdd Support; To Install Software Patches - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

1. Double-click on setup.exe located in \HP\DRIVERS\W98\BAYMGR directory.
2. Follow the setup instructions.
3. Click Finish to restart your computer.

To install USB FDD support

The USB FDD drivers are in the \HP\DRIVERS\W98\FLOPPY directory on the HP
Windows 98 Recovery CD.
To install the USB FDD drivers:
1. Connect the USB Floppy Disk drive to the computer.
2. The computer will identify that a new USB device has been added to the system, and
will display the Add New Hardware wizard. Click Next to continue.
3. Another dialog box will appear asking what you would like Windows to do. Select
the default "Search for the best driver for your device" and click Next to continue.
4. In the next dialog box, there will be an option to specify a location. Select this and
click Browse to browse to the \HP\DRIVERS\W98\FLOPPY directory on the
Recovery CD. Once you have located the drivers, select Next to continue.
5. Windows should inform you that it has found drivers for the USB Floppy Disk and
that it is ready to install the drivers. Click Next to continue.
6. Windows will inform you that it has finished installing the drivers for your new
hardware. Click Finish. Your new floppy disk is now successfully installed.
7. Reboot your system.
You should see a floppy disk with a new drive letter added when you look inside My
Computer.

To install software patches

These patches fix miscellaneous shutdown/suspend/resume and audio issues. The patches
can be found in \HP\DRIVERS\W98\QFE.
1. Double-click \HP\DRIVERS\W98\QFE-SHUTDOWN\4756us8.exe
2. Click Yes to install the Windows 98 SE Update.
Installing Retail Windows 98 Second Edition
Corporate Evaluator's Guide
Using Windows 98
121