To Install Touchpad Support; To Install Support For The Usb-To-Serial Dongle - HP Omnibook XE3 Evaluator Manual

Using Windows XP
Installing Retail Windows XP
The Rewind, Play/Pause, Stop, and FForward button controls for a Music CD-ROM
or DVD movie on certain notebooks.
1. Double-click \HP\DRIVERS\HPCI\SETUP.EXE from the Recovery CD.
2. Click Next then Yes to accept the license agreement.
3. Click Next to continue, then OK in the "...has been successfully installed" box.

To install touchpad support

If a retail version of Windows XP is installed, the touchpad support must be added. This
driver is located on the Recovery CD in \HP\DRIVERS\TOUCHPAD.
1. Double-click \HP\DRIVERS\TOUCHPAD\SETUP.EXE on the Recovery CD.
2. Choose the language of this installation then click OK.
3. Click Next at the Welcome screen then Next again.
4. Click Next to accept Current Settings.
5. Click "No, I will restart my computer later." and click Finish. Continue installing
other drivers.

To install support for the USB-to-serial dongle

If you've installed a retail version of Windows XP and want to use a serial device, you'll
need to install this dongle.
1. To start the installation, plug the USB-to-serial dongle into one of the USB ports on
the HP notebook.
2. In the "Welcome to the Found New Hardware..." window (found USB <-> serial)
click Next.
3. Click Finish to finalize the installation.
4. In the next "Welcome to the Found New Hardware..." window (found USB serial
port) click Next.
5. Click Finish to finalize the installation.
100 Corporate Evaluator's Guide