Setting Up Your Computer; Step 1 - Install The Battery - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

Setting Up Your Computer

WARNING
WARNING
Improper use of keyboards and other input devices has been associated with
ergonomic injury. For information about reducing your risk, see Working in
Comfort in the online HP Library, or visit our ergonomics web site,
www.hp.com/ergo. For a summary about working with a notebook computer, see
"Working in Comfort with a Notebook PC" on page 43.
If you are using your notebook computer as your primary computer, or using it for
extended periods, you should use it with a full-size keyboard, monitor, and mouse.
This can reduce the risk of ergonomic injury. See Working in Comfort in the online
HP Library.
When you set up your computer for the first time, you'll need to install and charge the
battery, connect the AC adapter, turn on the computer, and run the Windows setup
program.
Step 1 – Install the battery
Do not mutilate or puncture batteries. Do not dispose of batteries in fire, or they
can burst or explode, releasing hazardous chemicals. Rechargeable batteries must
be recycled or disposed of properly.
Your computer is shipped with the battery installed. If the battery has been removed, you
should install it:
1. Turn the computer upside down.
2. Insert the front end of the battery into the battery compartment on the bottom of the
computer, then press the back end in until it clicks into place.
Introducing the Notebook Computer
Setting Up Your Computer
Corporate Evaluator's Guide 21