Step 2 - Connect Ac Power - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

CAUTION
Important
Step 2 – Connect AC power
Use only the HP AC adapter included with your computer (or other approved
adapter). Using any other AC adapter could damage the computer and may void
your warranty (see the warranty statement in this manual).
If you have an expansion base, do not dock your computer in it until after the computer
boots up for the first time.
• Plug in the AC adapter, and connect it to the AC adapter jack on the back of the
computer. The computer's battery then starts charging.
While the battery is charging, you can continue with step 3.
Introducing the Notebook Computer
Setting Up Your Computer
Corporate Evaluator's Guide 23