Table of Contents
Advertisement
•
D-WDR: This camera has 3D-DNR which provides intelligent light level control even when strong
backlight is present.
- Off: Deactivated status.
- Indoor Compensation: To be used when the camera is installed internally.
- Outdoor Compensation: To be used when the camera is installed externally.
•
Return: Save changes and return to the previous menu.
Use this function when adjustment of the colour output is needed.
1. Move the triangular cursor to WHITE BAL on the Set Up menus screen, using the Up and Down buttons
2. Select the desired mode using the Left and Right buttons.
Select the most appropriate mode for the prevailing installation conditions.
•
ATW: Use this mode when the colour temperature is from 1,800K to 10,500K.
•
AWB: Use this mode when the colour temperature is from 3,000K to 7,000K.
•
AWC
SET: Direct and focus the camera toward a blank white sheet of paper and press the SET
button. If the lighting conditions change re-calibration will be required.
•
Manual: Manual setting allows for more detailed colour control. First adjust the white balance using
either ATW or AWB. Then change to manual mode and press the SET button.
14
WDR OFF
White Balance
SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
MANUAL WB
BLUE
RED
RETURN
High Resolution 700TVL Cameras
WDR ON
DC
ATW
COLOR
ON
|
31
IIIIIIIIII IIIIIIIIII
20
|
IIIIIIII IIIIIIIIIIII
RET
Hide quick links:
Advertisement
Table of Contents
