Adjust; Reset; Exit - Genie WISH96 Series User Manual

This function is used to adjust the video output, and to select the type of monitor where it's being
displayed.
1. When the Set Up menu is displayed select ADJUST using the Up and Down buttons.
• Sharpness: The outline of an image becomes sharp and more distinct as the level of sharpness
increases.
• Monior: Select the appropriate monitor type.
- LCD: Select this option when using a LCD monitor.
(You can adjust the Gamma, Level, Blue & Red Gain on the submenu)
- CRT: Select this option when using a CRT monitor.
(You can adjust the Level, Blue & Red Gain on the submenu)
- USER: Select this option if the monitor being used has a poor contrast rate. Go into the submenu
and adjust the Gamma, Level and Red and Blue Gain.
The camera is reset to factory default values.
Select EXIT and press the Set button to save the current settings and exit the Set Up menu.

Adjust

SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST

RESET

EXIT

ADJUST
SHARPNESS
MONITOR
RETURN
Reset
Exit
High Resolution 700TVL Cameras
DC
ATW
COLOR
ON
|
25
IIIIIIIIII IIIIIIIIII
LCD
RET
21