Exposure - Genie WISH96 Series User Manual

1. On the Set Up menu, Select EXPOSURE using the Up or Down buttons.
2. Select the desired shutter mode by pressing the Left or Right button.
• Electronic Shutter: DC Lens is set by default to 1/50 and Manual is defaulted to the Auto shutter
setting, but can be adjusted from 1/50 to 1/100,000. Sens Up does not work when in Manual.
- DIS (Digital Image Stabiliser): Select DIS mode if the camera is moving due to an environmental
condition. It stabilises the image. Sens Up does not work when in DIS mode.
• AGC (Auto Gain Control): The higher the AGC level is, the more noise will appear.
- Off: Deactivated
- Low: 28dB Gain is applied.
- Mid: 32dB Gain is applied.
- High: 36dB Gain is applied.
NOTE
* Sens Up mode does not work while the Electronic shutter is set to Manual or DIS.
12

Exposure

SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
EXPOSURE
SHUTTER
AGC
SENSE-UP
BLC
D-WDR
RETURN
High Resolution 700TVL Cameras
DC
ATW
COLOR
ON
AUTO
MID
AUTO
OFF
OFF
RET