Table of Contents
Advertisement
White Balance
The White Balance function is used to control the "on-screen" colours.
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the Left or Right button.
* There are five user selectable White Balance settings available.
* ATW : (Auto Tracking White Balance)
Normal setting; when the colour temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)
* AWB : The White Balance is automatically adjusted in a specific environment.
* AWC → SET : To obtain the best results press the SET button while the camera is focused onto white
paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.
* MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and
B-Gain(Blue) while monitoring the color of the image.
* OUTDOOR : Select this when the colour temperature is 5,400˚k.
* INDOOR : Select this when the colour temperature is 3,100˚k.
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
WHITE BAL MANUAL
BLUE
RED
RETURN
16
DC
ATW
COLOR
ON
40
21
RET
Advertisement
Table of Contents
