Table of Contents
Advertisement
Use this function when adjustment of the colour output is needed.
1. Move the triangular cursor to WHITE BAL on the Main Menu screen, using the Up and Down buttons
2. Select the desired mode using the Left and Right buttons.
Select the most appropriate mode for the prevailing installation conditions.
•
ATW: Use this mode when the colour temperature is from 1,800K to 10,500K.
•
AWB: Use this mode when the colour temperature is from 3,000K to 7,000K.
•
AWC
SET: Direct and focus the camera toward a blank white sheet of paper and press the SET
button. If the lighting conditions change re-calibration will be required.
•
MANUAL: Manual setting allows for more detailed colour control. First adjust the white balance using
either ATW or AWB. Then change to manual mode and press the SET button.
NOTE
White Balance may not work correctly in the following conditions:
* When there is a very high colour temperature within the subject, for example a sunset in a clear sky.
* It is very dark
* If the camera is pointed towards fluorescent light, or there is a drastic change in lighting, the White
Balance operation may become unstable.
* In these conditions, AWB mode is recommended.
White Balance
MAIN MENU
1.LENS
2.EXPOSURE
3.WDR
4.WHITE BAL
5.DAY&NIGHT
6.NR
7.SPECIAL
8.ADJUST
9.RESET
10.EXIT
MANUAL WB
1.BLUE
IIIIIIIIII IIIIIIIIII
2.RED
IIIIIIII IIIIIIIIIIII
3.RETURN
HD-SDI 2MP Real WDR Cameras
DC
OFF
ATW
COLOUR
|
50
|
50
RET
15
Advertisement
Table of Contents
